Upgrade
Avanço Race Face AM - 70mm
The Atlas AM stem is designed specifically for the all mountain rider. Machined in our British Columbia, Canada manufacturing facility, the Atlas stem is light enough for cross-country but designed for light free riding, providing the ultimate in versatility.
• Machined in our British Columbia, Canada manufacturing plant from 6061-T6 aluminum.
• Four bolt bar clamp holds bar securely in position.
• Interlocking U-Shaped Handlebar Clamp Geometry.
• Faceplate eliminates “stress risers” which cause your bar to bend or break.
• Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube.
• Available in 1 1/8 with a 31.8mm bar clamp only
• Laser etched logos.
Specs
BUILT FOR: AM
SIZE: 50, 70, 90, 110mm
RISE: 8º
BAR DIAMETER: 31.8mm
WEIGHT: 190g (110mm)
COLOUR: Bad Ass Black
Movimento Pedaleiro Hope Cerâmica
External Bottom Bracket These are the first pics of the all new External bottom bracket. We've got more than fed up replacing our existing units on a monthly basis, so this little bit of kit should save us all time (and money!) Using some custom made full stainless steel bearings (made by INA who do all our bearings) these machined aluminium cups are sealed with a labyrinth seal like on the hub rotor bodies and the aluminium centre tube is sealed with o-rings. Testing has been going well and we should see the units ready to go by January.
The external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit - making it ideal for Shimano, Race Face, FSA and others.
The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units.
The bearings are made (as all our bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.
We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.
The unit is suitable for 68 & 73mm shell width’s - with an 83mm width version and a specific road unit to follow later in the year..
Standard 6 colours are available on cups - red, blue, silver, black, gold and gunmetal, with the centre tubes being black on the stainless and gunsmoke on the ceramic.
The ceramic weighs 109g and the stainless 113g
Corrente SRAM PC 991 Hollow Pin
Compatibility: 9-speed
Push Pin Power: 200 kgf, Chrome Hardened Pins
Technology: PowerChain II™, PowerLink™ Gold
Weight: 279g / 114 Links
The Atlas AM stem is designed specifically for the all mountain rider. Machined in our British Columbia, Canada manufacturing facility, the Atlas stem is light enough for cross-country but designed for light free riding, providing the ultimate in versatility.
• Machined in our British Columbia, Canada manufacturing plant from 6061-T6 aluminum.
• Four bolt bar clamp holds bar securely in position.
• Interlocking U-Shaped Handlebar Clamp Geometry.
• Faceplate eliminates “stress risers” which cause your bar to bend or break.
• Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube.
• Available in 1 1/8 with a 31.8mm bar clamp only
• Laser etched logos.
Specs
BUILT FOR: AM
SIZE: 50, 70, 90, 110mm
RISE: 8º
BAR DIAMETER: 31.8mm
WEIGHT: 190g (110mm)
COLOUR: Bad Ass Black
Movimento Pedaleiro Hope Cerâmica
External Bottom Bracket These are the first pics of the all new External bottom bracket. We've got more than fed up replacing our existing units on a monthly basis, so this little bit of kit should save us all time (and money!) Using some custom made full stainless steel bearings (made by INA who do all our bearings) these machined aluminium cups are sealed with a labyrinth seal like on the hub rotor bodies and the aluminium centre tube is sealed with o-rings. Testing has been going well and we should see the units ready to go by January.
The external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit - making it ideal for Shimano, Race Face, FSA and others.
The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units.
The bearings are made (as all our bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.
We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.
The unit is suitable for 68 & 73mm shell width’s - with an 83mm width version and a specific road unit to follow later in the year..
Standard 6 colours are available on cups - red, blue, silver, black, gold and gunmetal, with the centre tubes being black on the stainless and gunsmoke on the ceramic.
The ceramic weighs 109g and the stainless 113g
Corrente SRAM PC 991 Hollow Pin
Compatibility: 9-speed
Push Pin Power: 200 kgf, Chrome Hardened Pins
Technology: PowerChain II™, PowerLink™ Gold
Weight: 279g / 114 Links
publicada por pjfa às
19:48
<< Página inicial